SKU: 30494

95-INCH TWIN CAM EFI PERFORMER RPM POWER PACKAGES FOR PART NUMBERS 30494, 30244 AND 30204 FOR CHAIN DRIVEN CAMS Edelbrock CNC ported heads are the heart of the package, which we match with exactly the right parts to give you the gut-wrenching power that every rider wants. For individual components, click here. Edelbrock CNC-ported EFI cylinder heads with a 72cc combustion chamber and your choice of black, polished or natural finish Edelbrock Performer RPM chain or gear driven camshafts Edelbrock/JE pistons, rings, wrist pins and pin locks for 95-inch motor Gasket set #16876 (includes all gaskets needed for upgrade) Adjustable pushrod set #1738 EFI Intake Manifold #1768 for stock throttle body (C) High-Flow 8" EFI Air Cleaner CD-ROM with application-specific fuel calibrations for popular aftermarket pipes (b) 107+ HP 102 FT/LBS. (A) COMPRESSION RATIO 10.25:1 (A) Chassis dyno test results on our best combination. Results will vary depending on the pipes you use. (B) Calibrations included for many popular Dyna, Softails, Road Kings and Dresser exhaust sytems (C) Order manifold #1769 for aftermarket throttle body. (D) 4-gear cam drive set required for installation with gear drive cams (not included) Note: Downloading calibrations into Delphi ECU requires Screamin' Eagle Tuner Kit #32107-01A, B, C, or D. AVAILABLE IN BLACK WRINKLE, GREY FACTORY AND NATURAL FINISH. all product is subject to availability; if your part is not available you will be immediately refunded SO BUY WITH CONFIDENCE AT BARNUMS!!! Recommended spark plugs for these heads are Champion RC12YC. EDELBROCK